Repair Procedures: Installation

Install in the reverse order of removal.
NOTE:
- Use a SST (09480-A3800) or 0.1969in. (5mm) bolt fix the inhibitor manual control lever in the 'N' Jig hole (A) when you assemble the inhibitor (B).
  
  Fig 1: Fixing Inhibitor Manual Control Lever In N Jig Hole Using SST
  Courtesy of HYUNDAI MOTOR AMERICA
- Adjust the shift cable after you install the inhibitor switch.
  (Refer to: Automatic Transaxle Control System - "SHIFT LEVER ").