Repair Procedures: Removal

Shift Lever Assembly Replacement 

1. Remove the center console assembly.

   (Refer to: "Interior - CONSOLE " in BD procedure).

2. Disconnect sports mode connector (A).
   Fig 1: Locating Sports Mode Connector

   Courtesy of HYUNDAI MOTOR AMERICA
3. Remove the control cable (A).
   Fig 2: Removing Control Cable

   Courtesy of HYUNDAI MOTOR AMERICA
4. Remove the shift lever assembly (A) by removing the bolts.

   Tightening Torque: 

   8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

   Fig 3: Removing Shift Lever Assembly Bolts

   Courtesy of HYUNDAI MOTOR AMERICA
5. Install in the reverse order of removal.
   NOTE: Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position.