LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Elantra Coupe GL, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.0L >> Knock Sensor (KS) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the intake manifold (Refer to "INTAKE & EXHAUST SYSTEM " in EM group).
  3. Disconnect the knock sensor connector (A).
  4. Remove the installation bolt (B), and then remove the sensor from the cylinder block.
    Fig 1: Identifying Knock Sensor Connector And Installation Bolt
    G10544318Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals