LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Elantra Coupe GL, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 1.8L >> Variable Charge Motion Actuator (VCMA) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the VCMA connector (A).
    Fig 1: Disconnecting VCMA Connector
    G10548964Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the VCMA (A) after removing 3 installation bolts.
    Fig 2: Removing VCMA
    G10548965Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals