LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Elantra Coupe GL, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 1.8L >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the rear seat (Refer to: "REAR SEAT " in BD procdure).
  3. Remove the fuel pump service cover (A).
    Fig 1: Removing Fuel Pump Service Cover
    G10548934Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel tank pressure sensor connector (A).
  5. Remove the fuel tank pressure sensor (B) after releasing the hooks vertically.
    Fig 2: Removing Fuel Tank Pressure Sensor Connector
    G10548935Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals