LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Elantra Coupe GL, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 1.8L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation hose (B).
  5. Remove the fuel tank air filter after removing the mounting bolts (C).
    Fig 1: Ventilation Hoses, Canister Close Valve Connector And Mounting Bolts
    G10548958Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter after rotating it in the direction of the pointer in the graphic.
    Fig 2: Locating Lever
    G10548959Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Locating Canister Close Valve
    G10548960Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals