LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Azera Base >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Front Axle Assembly >> Front Hub - Axle >> Repair procedures >> Disassembly

Repair procedures: Disassembly

  1. Remove the snap ring (A).
    Fig 1: Snap Ring
    G10367770Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the hub assembly from the knuckle assembly.
    1. Install the front knuckle assembly (A) on press.
    2. Lay a suitable adapter (B) upon the hub assembly shaft.
      Fig 2: Removing Hub Assembly From Knuckle Assembly
      G10367771Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the hub bearing inner race from the hub assembly.
    1. Install a suitable tool (A) for removing the hub bearing inner race on the hub assembly.
    2. Lay the hub assembly and tool (A) upon a suitable adapter (B).
    3. Lay a suitable adapter (C) upon the hub assembly shaft.
    4. Remove the hub bearing inner race (D) from the hub assembly by using press.
      Fig 3: Removing Hub Bearing Inner Race From Hub Assembly Using Press
      G10367772Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the hub bearing outer race from the knuckle assembly.
    1. Lay the hub assembly (A) upon a suitable adapter (B).
    2. Lay a suitable adapter (C) upon the hub bearing outer race.
    3. Remove the hub bearing outer race from the knuckle assembly by using press.
      Fig 4: Removing Hub Bearing Outer Race From Knuckle Assembly
      G10367773Courtesy of HYUNDAI MOTOR AMERICA
  5. Replace hub bearing with a new one.
scientia non olet · About LEMON Manuals