LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Accent GLS, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows >> Power Window Motor >> Repair procedures >> Inspection >> Front Power Window Motor Inspection

Front Power Window Motor Inspection

  1. Remove the front door trim panel.

    (Refer to "FRONT DOOR ")

  2. Disconnect the connector from the motor.
    Fig 1: Front Power Window Motor Connector Terminals
    G10363636Courtesy of HYUNDAI MOTOR AMERICA
  3. Connect the motor terminals No. 4 directly to battery voltage (12V) and connect the motor terminals No. 3 and No. 6 directly to battery (-). And then check that the motor operates smoothly. If the operation is abnormal, replace the motor.

    [Safety Power Window] 

    Fig 2: Power Window Motor Connector Terminals Continuity Chart (Safety Power Window)
    G10363637Courtesy of HYUNDAI MOTOR AMERICA
  4. Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.

    [General] 

    Fig 3: Power Window Motor Connector Terminals Continuity Chart (General)
    G10363638Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals