LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Accent GLS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (2 Of 2) >> DTC U1112: LIN Communication Error >> Component Inspection >> Component Inspection

Component Inspection

  1. IG "OFF".
  2. Connect probe to Battery Sensor to check signal waveform by using oscilloscope function.
  3. IG "ON" and monitor signal waveform.

    Specification:  Signal waveform will be displayed as Signal Waveform & Data

  4. Is the measured signal waveform OK?

    YES 

    NO 

    • Substitute with a known - good Battery Sensor and check for proper operation. If the problem is corrected, replace Battery Sensor and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About LEMON Manuals