LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2015 >> Accent GLS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Accelerator Pedal >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the installation nuts (B), and then remove the accelerator pedal module.
Fig 1: Accelerator Position Sensor Connector And Installation Nuts
G10362531Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals