LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Module Diagnosis >> DTC B1613: CAN timeout between IPM and CLU >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Check CAN communication
  1. CLUSTER open/poor connection
  2. Faulty CLUSTER power supply
  3. CLUSTER CAN High and Low line short to each other
Enable Conditions
  • Engine "ON'
Threshold Value
  • CLUSTER's CAN message is not received
Diagnostic Time
  • 10 sec
DTC Erasing
  • Erased DTC after solved problem
scientia non olet · About LEMON Manuals