LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Manual Transaxle System) >> Back-up Lamp Switch >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Remove the following items.
    1. Air cleaner assembly

      (Refer to "AIR CLEANER ")

    2. Battery and battery tray

      (Refer to "BATTERY ")

  2. Disconnect the back up lamp switch connector (A).
    Fig 1: Identifying Back Up Lamp Switch Connector
    G09150498Courtesy of HYUNDAI MOTOR AMERICA
  3. Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should be continuity.
    Fig 2: Checking Continuity Between Backup Lamp Switch Terminals No. 1 And 2
    G09150499Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals