LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Tucson SE, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Brake System) >> Front Disc Brake >> Repair Procedures >> Inspection >> Front Brake Pad Check

Front Brake Pad Check

WARNING: This page is about a different car, the 2013 Hyundai Tucson and 2012 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the pad wear. Measure the pad thickness and replace it, if it is less than the specified value.

    Pad thickness 

    Standard value: 11 mm (0.43 in)

    Service limit: 2.0 mm (0.0787 in)

  2. Check that grease is applied, to sliding contact points and the pad and backing metal for damage.
    Fig 1: Identifying Grease Applied Areas To Sliding Contact Points And Pad
    G06874530Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals