LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Tucson GLS, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the front driveshaft. Refer to Front Driveshaft .
  2. Remove the TJ joint assembly. Refer to TJ Joint .
  3. Remove the remove the both side of band (B) of the dynamic damper (A).
    Fig 1: Dynamic Damper With Clamp
    G09267784Courtesy of HYUNDAI MOTOR CO.
  4. Fix the driveshaft (A) with a vice (B) as illustrated.
    Fig 2: Fixing Driveshaft Using Vice
    G06874439Courtesy of HYUNDAI MOTOR CO.
  5. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is removed.
  6. Separate the dynamic damper (A) from the shaft (B) carefully.
    Fig 3: Dynamic Damper And Shaft
    G06874440Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals