LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Tucson GLS, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper.
  2. Install the dynamic damper.
  3. Install the dynamic damper band (A).
  4. Using the SST(09495-3K000), secure the TJ boot bands (B).

    Clearance (A)  : 2.0 mm (0.0787 in.) or less

    Fig 1: Dynamic Damper & Bands
    G09267787Courtesy of HYUNDAI MOTOR CO.
  5. Install the TJ joint assembly. Refer to TJ Joint .
  6. Install the front driveshaft. Refer to Front Driveshaft .
  7. Check the front alignment. Refer to ALIGNMENT .
scientia non olet · About LEMON Manuals