LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Tucson GLS, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> BJ Boot >> Repair Procedures

Repair Procedures

  1. Remove the front driveshaft. Refer to Front Driveshaft .
  2. Remove the TJ joint assembly. Refer to TJ Joint .
  3. Remove the Dynamic damper. Refer to Dynamic Damper .
  4. Using a plier or flat-tipped (-) screwdriver, remove the BJ boot bands (A).
    Fig 1: Removing Clamp Using Flat-Tipped (-) Screwdriver
    G06874441Courtesy of HYUNDAI MOTOR CO.
  5. Remove the BJ boot.
  6. Install in the reverse order of removal.
    NOTE:
    • Do not disassemble the BJ assembly.
    • Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease.
    • The boot band should be replaced with a new one.
  7. Check the front alignment. Refer to ALIGNMENT .
scientia non olet · About LEMON Manuals