LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Sonata Hybrid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Engine Control System (HEV)) >> Electric EGR Control Valve >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Hyundai Sonata and 2016 Hyundai Sonata. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: After replacing the Electric EGR control valve, MUST perform the "Component Change Routine" procedure with GDS.
Otherwise trouble related with engine performance or emission control may occur until ECM learning about the component is over.
  1. Turn the ignition switch OFF.
  2. Connect the GDS to Data Link Connector (DLC).
  3. Turn ignition switch ON.
  4. Select "Vehicle, Model year, Engine, System".
  5. Select "Vehicle S/W Management".
  6. Select "Component Change Routine".
  7. Select "EGR Valve Change".
  8. Perform the procedure in accordance with the message
Fig 1: Screen Display - EGR Valve Change (1 Of 2)
G12060859Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Screen Display - EGR Valve Change (2 Of 2)
G12060860Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals