LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Sonata Hybrid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Automatic Transaxle Control System (HEV)) >> Line Pressure Control Solenoid Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2017 Hyundai Sonata and 2016 Hyundai Sonata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Remove the Hybrid Power Control Unit (HPCU) assembly. (Refer to "HPCU ")
  3. Disconnect the solenoid valve connector (A).
    Fig 1: Disconnecting Solenoid Valve Connector
    G12061113Courtesy of HYUNDAI MOTOR AMERICA
  4. Measure the resistance between power terminal (5) and signal terminal (17).

    Specification:  5.1 ± 0.3 Ω

    Fig 2: Measuring Resistance Between Power Terminal (5) And Signal Terminal (17)
    G12061114Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals