LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Sonata Hybrid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Automatic Transaxle Control System (HEV)) >> Input Speed Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Sonata and 2016 Hyundai Sonata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the valve body assembly.

    (Refer to "VALVE BODY ")

  2. Disconnect the input & output speed sensor connector (A) from the main wiring.
  3. Remove the input & output speed sensor (B) after removing the bolts (2ea).

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)

    Fig 1: Locating Input & Output Speed Sensor And Connector
    G12061072Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals