LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Santa Fe GLS, FWD >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Ignition Coil >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Measure the primary coil resistance between terminals (+) and (-).
    Fig 1: Measuring Primary Coil Resistance Between Positive And Negative Terminals
    G09267373Courtesy of HYUNDAI MOTOR AMERICA

    Standard value:  0.62Ω ± 10%

scientia non olet · About LEMON Manuals