LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Santa Fe GLS, FWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Line >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF, and then remove battery (-) cable.
  2. Release the residual pressure in fuel line.

    (Refer to Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  3. Disconnect the low pressure fuel quick-connector (A).
    Fig 1: Identifying Low Pressure Fuel Quick-Connector
    G09267542Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the vapor hose (A) which is connected from the PCSV.
    Fig 2: Identifying Vapor Hose
    G09267543Courtesy of HYUNDAI MOTOR AMERICA
  5. Lift the vehicle.
  6. Remove the fuel tank.

    (Refer to Fuel Delivery System - "FUEL TANK ")

  7. Disconnect the vapor tube quick-connector (A).
    Fig 3: Identifying Vapor Tube Quick-Connector
    G09267544Courtesy of HYUNDAI MOTOR AMERICA
  8. Open the vapor tube and low fuel line fixing clip to using driver.
  9. Release the under cover (A) after remove the mounting bolts.
    Fig 4: Identifying Under Cover
    G09267545Courtesy of HYUNDAI MOTOR AMERICA
  10. Disconnect the fuel & brake line protect (A) from the fixing clip.
    Fig 5: Identifying Fuel And Brake Line Protect
    G09267546Courtesy of HYUNDAI MOTOR AMERICA
  11. Disconnect the fuel line fixing bracket (A) to engine room low.
    Fig 6: Identifying Fuel Line Fixing Bracket
    G09267547Courtesy of HYUNDAI MOTOR AMERICA
  12. Remove the fuel line.
scientia non olet · About LEMON Manuals