Common Specs & Procedures
GENESIS COUPE COMMON SPECS & PROCEDURES
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATIONS | ||
| Torque | Torque values are in the text or in tables of the AIR CONDITIONING SYSTEM article. Also refer to TORQUE SPECIFICATIONS table under WHEN INSTALLING CONNECTING PARTS . | ||
| Axle Nut/Hub Nut | |||
| Front | 65-80 ft. lbs. (88-108 N.m) | ||
| Rear | 65~80 ft. lbs. (88-108 N.m) | ||
| Battery | |||
| 2.0L | Refer to BATTERY and CHARGING SYSTEM . | ||
| 3.8L | Refer to BATTERY and CHARGING SYSTEM . | ||
| Brakes | |||
| Bleeding Sequence | BRAKE SYSTEM BLEEDING | ||
| Disc Brakes | |||
| Service Specifications | SPECIFICATIONS | ||
| Torque | TIGHTENING TORQUES | ||
| Charging | |||
| Generator | |||
| 2.0L | CHARGING SYSTEM | ||
| 3.8L | Refer to CHARGING SYSTEM . | ||
| Torque | |||
| 2.0L | Refer to text under ALTERNATOR . | ||
| 3.8L | Refer to text under ALTERNATOR . | ||
| Drive Belts | |||
| Inspection | |||
| Generator Belt - 2.0L | INSPECT DRIVE BELT | ||
| Generator Belt - 3.8L | Refer to INSPECT DRIVE BELT . | ||
| Engine Cooling | |||
| General Service Specifications | |||
| 2.0L | Refer to COOLANT and ENGINE SPECIFICATIONS . | ||
| 3.8L | Refer to COOLANT and ENGINE SPECIFICATIONS . | ||
| Radiator Cap Pressure | |||
| 2.0L | 14-19 psi | ||
| 3.8L | 14-19 psi | ||
| Thermostat R & I | |||
| 2.0L | THERMOSTAT | ||
| 3.8L | Refer to THERMOSTAT . | ||
| Water Pump R & I | |||
| 2.0L | WATER PUMP | ||
| 3.8L | Refer to WATER PUMP . | ||
| Engine Mechanical | |||
| 2.0L | |||
| Compression | COMPRESSION PRESSURE INSPECTION | ||
| Oil pressure | 18.49 psi (127 kPa (1.3 kg/cm2 ,) or above at 1000 RPM | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TIGHTENING TORQUES | ||
| 3.8L | |||
| Compression | COMPRESSION PRESSURE | ||
| Oil pressure | 18.77 psi (130 kPa (1.32 kg/cm2 ) or above at 1000 RPM | ||
| Overhaul | - | ||
| Torque | - | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | |||
| 2.0L | 86.8 - 93.9 ft. lbs. (117.6 - 127.4 N.m) | ||
| 3.8L | 52.80 - 55.69 ft. lbs. (71.54 - 75.46 N.m) | ||
| Fuel System (2.0L) | |||
| Pressure Specification | 55.0 psi (3.87 kgf/cm2 , 379.5 kPa) | ||
| Fuel Pressure Test Procedure | Refer to FUEL PRESSURE TEST . | ||
| Fuel Filter Location | Refer to FUEL FILTER . | ||
| Fuel Filter R & I | Refer to FUEL FILTER . | ||
| Fuel System (3.8L) | |||
| Pressure Specification | 55.0 psi (3.87 kgf/cm2 , 379.5 kPa) | ||
| Fuel Pressure Test Procedure | Refer to FUEL PRESSURE TEST . | ||
| Fuel Filter Location | Refer to FUEL FILTER . | ||
| Fuel Filter R & I | Refer to FUEL FILTER . | ||
| Ignition | |||
| Firing Order & Cylinder Identification | |||
| 2.0L | 1-3-4-2: Also see FIRING ORDER & CYLINDER IDENTIFICATION . | ||
| 3.8L | 1-2-3-4-5-6: Also see FIRING ORDER & CYLINDER IDENTIFICATION . | ||
| Spark Plug | |||
| 2.0L | IGNITION SYSTEM | ||
| 3.8L | Refer to IGNITION SYSTEM . | ||
| Starting (2.0L) | |||
| Starter | STARTING SYSTEM | ||
| Torque | Refer to tightening torque text under STARTER . | ||
| Starting (3.8L) | |||
| Starter | Refer to STARTING SYSTEM . | ||
| Torque | Refer to tightening torque text under STARTER . | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT | ||
| Torque | TIGHTENING TORQUES | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 65.1-79.6 ft. lbs. (88.3~107.9 N.m) | ||