Cluster Replacement

NOTE:

When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
Put on gloves to protect your hands.

Using a screwdriver or remover, remove the cluster fascia lower panel (A).

Fig 1: Identifying Cluster Lower Panel
Courtesy of HYUNDAI MOTOR CO.
After loosening the mounting screws, remove the cluster assembly (A).

Fig 2: Identifying Cluster & Mounting Screws
Courtesy of HYUNDAI MOTOR CO.
Disconnect the connectors (A).

Fig 3: Identifying Connectors
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse the removal.
NOTE:
- Make sure the connectors are connected properly.