LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Genesis 3.8 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System - 3.8L >> Inhibitor Switch >> Repair Procedures >> Inspection >> Power Circuit Inspection

Power Circuit Inspection

  1. Disconnect the Inhibitor switch connector.
  2. Ignition KEY "ON" and Engine "OFF".
  3. Measure voltage between supplied power and ground at inhibitor circuit.

    Specification  : Approx. 12V

scientia non olet · About LEMON Manuals