Customization Function
WARNING: This page is about a different car, the 2014 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.
Using the ETACS system of scan tool (M.U.T.-III), the following functions can be programmed. The programmed information is held even when the battery is disconnected.
| Adjustment item (scan tool display) | Adjustment item | Adjusting content (scan tool display) | Adjusting content |
|---|---|---|---|
| Interior light delay time | Adjustment of interior light delay shutdown time | 0 sec. | 0 second (no delay shutdown time) |
| 7.5 sec. | 7.5 seconds < Initial condition (vehicles without central door locking system) > | ||
| 15 sec. | 15 seconds | ||
| 30 sec. | 30 seconds < Initial condition (vehicles with central door locking system) > | ||
| 60 sec. | 60 seconds | ||
| 120 sec. | 120 seconds | ||
| 180 sec. | 180 seconds | ||
| Interior light auto cut timer | Adjustment of interior light automatic shutoff function (only dome light switch is door position) | Disable | No function |
| 30min | With function (Initial condition) |