LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Equus Ultimate >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Front Suspension & Wheel Alignment) >> Stabilizer Bar >> Removal And Installation >> Notes

Removal And Installation: Notes

WARNING: This page is about a different car, the 2014 Mitsubishi Mirage. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Before removing the steering wheel and air bag module assembly, refer to SERVICE PRECAUTIONS and Air Bag Module and Clock Spring. Also, put the front wheels in straight-ahead position. Failure to do so may damage the SRS clock spring and render the SRS air bag inoperative, which results serious driver injury.
  • *: Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on the ground in an unladen condition.
Fig 1: Exploded View Of Stabilizer Bar With Torque Specifications
G09631697Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Required Special Tools: