Repair procedures: Removal

Release the residual pressure in fuel line.
(Refer to RELEASE RESIDUAL PRESSURE IN FUEL LINE .
Folding the rear seat cushion.
Remove the fuel pump service cover (A) after loosening the screws.

Fig 1: Identifying Fuel Pump Service Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the sub fuel sender connector (A).
Remove the sub fuel sender (B) from the fuel tank after removing mounting bolts.

Fig 2: Identifying Sub Fuel Sender And Connector
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Identifying Sub Fuel Sender
Courtesy of HYUNDAI MOTOR AMERICA