LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Equus Ultimate >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Filler-Neck Assembly >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the fuel filler hose (A) and the leveling hose (B).
    Fig 1: Identifying Fuel Filler And Leveling Hose
    G09789485Courtesy of HYUNDAI MOTOR AMERICA
  2. Disconnect the vapor hose quick-connector (A) after removing the trunk luggage trim.
    Fig 2: Identifying Vapor Hose Quick-Connector
    G09789486Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the rear-LH wheel, tire, and the inner wheel house.
  4. Remove the filler-neck assembly from the vehicle after removing the vapor hose mounting bolts (A) and the bracket mounting nuts (B).
    Fig 3: Identifying Vapor Hose Mounting Bolts And Nuts
    G09789487Courtesy of HYUNDAI MOTOR AMERICA
    Fig 4: Identifying Vapor Hose Mounting Bolts And Nuts
    G09789488Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals