LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Equus Ultimate >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Accelerator Pedal >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Disconnect the accelerator control connector (B).
  4. Remove the accelerator pedal in the direction of "Removal direction" in the figure after removing the installation bolt (B).
    Fig 1: Removing Accelerator Pedal
    G09789491Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Identifying Accelerator Pedal And APS
    G09789492Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals