LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Torque Converter Control Solenoid Valve >> Repair procedure >> Installation

Repair procedure: Installation

  1. Installation is the reverse of removal.
    NOTE:
    • Adding Automatic Transaxle Fluid (ATF).

      (Refer to "FLUID ")

    • Perform Transaxle Control Module (TCM) learning after replacing the valve body to prevent slow transaxle response, jerky acceleration and jerky startup.

      (Refer to "REPAIR PROCEDURE ")

    • Use new valve body gasket (A).
      Fig 1: Valve Body Gasket
      G10243346Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals