LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Control System >> Torque Converter Control Solenoid Valve >> Repair procedure >> Inspection

Repair procedure: Inspection

  1. Turn ignition switch OFF.
  2. Disconnect the Solenoid valve connector.
  3. Measure resistance between sensor signal terminal and sensor ground terminal.
  4. Check that the resistance is within the specification.

    (Refer to "SPECIFICATIONS ")

scientia non olet · About LEMON Manuals