Monitor Scantool Data
WARNING: This page is about a different car, the 2013 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
- Check DTC status
- Check DTC on the PCM/ECM with Scantool.
- Check that there is any DTC related PCM/ECM.
- Perform Troubleshooting the DTC from PCM/ECM with appropriate DTC Troubleshooting Guide first
- Repair or replace as necessary after erasing DTC with Scantool.
- Check DTC on SmartKey Unit (SMK IMMO Unit) side and erase the DTC with scantool.
- Has the DTC gone after erasing with scantool?
YES - Check poor connection between harness connector and SMK Unit or PCM/ECM:
Thoroughly check for looseness, poor connection, bends, corrosion, contamination, deformation or damage of connector. Repair or replace as necessary and then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO - Go to W/Harness Inspection procedure.
- Check poor connection between harness connector and SMK Unit or PCM/ECM: