LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Smart Key Unit Diagnosis) >> DTC B1602: CAN Error >> Verification of Vehicle Repair

Verification of Vehicle Repair

WARNING: This page is about a different car, the 2013 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scantool and select "Diagnostic Trouble Codes (DTCs)" mode.
  2. Clear DTC using a scantool.
  3. Drive the vehicle within DTC Enable conditions in General information.
  4. After selecting "Diagnostic Trouble Codes (DTCs)" mode and check DTC is recorded again.
  5. Are any DTCs recorded?

    YES 

    NO 

    YES
    • Go to the applicable troubleshooting procedure.
    NO
    • System is performing to specification at this time.
scientia non olet · About LEMON Manuals