Repair procedures: Disassembly

Loosen the nuts (B) and then remove the cover (A).

Fig 1: Identifying Alternator Cover And Nuts
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the mounting bolts (A) and remove the regulator assembly (B).

Fig 2: Identifying Alternator Mounting Bolts And Regulator Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Remove the slip ring guide (A).

Fig 3: Identifying Slip Ring Guide
Courtesy of HYUNDAI MOTOR AMERICA
Using the SST (09373-27000), remove the pulley (A).

Fig 4: Removing Pulley Using SST (09373-27000)
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the 4 bolts (A) and then remove the rear housing (B).

Fig 5: Identifying Rear Housing And Bolts
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the rotor (A) and the housing (B).

Fig 6: Identifying Housing And Rotor
Courtesy of HYUNDAI MOTOR AMERICA
Reassembly is the reverse order of disassembly.