Repair Procedures: Installation

Install the #1, #2 cylinder bore water jacket separator (A).

Fig 1: Identifying Cylinder Bore Water Jacket Separator
Courtesy of HYUNDAI MOTOR AMERICA

NOTE: Insert the separator align with block inner side protrusion, it must be located under the cylinder head installing surface.

Fig 2: Identifying Inner Block Separator (1 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Identifying Inner Block Separator (2 Of 2)
Courtesy of HYUNDAI MOTOR AMERICA
Install the LH/RH cylinder head assembly and gasket.
(Refer to "CYLINDER HEAD ")