LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Azera Base >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Auto Lighting Control System >> Auto Light Sensor >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the auto light sensor (A) from crash pad upper side by using screw driver.
    Fig 1: Identifying Auto Light Sensor And Connector
    G08814611Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the auto light sensor connector (B).
scientia non olet · About LEMON Manuals