Component Inspection
- Ignition "ON" & Engine "OFF" and Using a scan tool, clear the DTC.
- Ignition "OFF".
- Disconnect the battery (-) terminal cable from the battery, and wait at least one minutes.
- Disconnect Passenger side PODS-F sensor Mat & ECU connector.
- Substitute the Passenger side PODS-F sensor Mat & ECU and check for proper operation.
- Is DTC present problem?
YES
- Substitute a known-good Passenger side PODS-F sensor Mat & ECU, and check for proper operation.
If the problem is corrected, replace Passenger side PODS-F sensor Mat & ECU. Then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Substitute the Passenger side PODS-F sensor Mat & ECU main harness and check for proper operation.
If the problem is corrected, replace Passenger side PODS-F sensor Mat & ECU main harness. Then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.
- Substitute a known-good Passenger side PODS-F sensor Mat & ECU, and check for proper operation.