LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Accent SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Charging System) >> Alternator >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2014 Hyundai Santa Fe Sport and 2013 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative terminal.
  2. Disconnect the air compressor connector (A) and the alternator connector (B), and remove the cable from alternator "B" terminal (C).
    Fig 1: Identifying Air Compressor Connector, Alternator Connector And Alternator Terminals
    G09364822Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the drive belt (A) after turning the drive belt tensioner (B) counter clockwise.
    Fig 2: Turning Drive Belt Tensioner To Counter Clockwise
    G09364823Courtesy of HYUNDAI MOTOR AMERICA
  4. Full out the through bolt and then remove the alternator (A).
    Fig 3: Identifying Alternator
    G09364824Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals