LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Accent GS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Air Conditioning System) >> Photo Sensor >> Repair procedures >> Inspection

Repair procedures: Inspection

WARNING: This page is about a different car, the 2014 Hyundai Santa Fe Sport and 2013 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch ON.
  2. Connect the GDS.
  3. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
  4. The voltage will rise with higher intensive light and reduce with lower intensive light.
    Fig 1: Identifying Photo Sensor Connector
    G09366702Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals