LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Accent GS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Smart Key Unit System Diagnosis) >> DTC B1602-00: CAN Error >> Verification of Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

WARNING: This page is about a different car, the 2014 Hyundai Santa Fe Sport and 2013 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)"  mode
  2. Clear DTC using a GDS.
  3. Drive the vehicle within DTC Enable conditions in General information.
  4. After selecting "Diagnostic Trouble Codes (DTC)"  mode and check DTC is recorded again.
  5. Are any DTCs recorded?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System is performing to specification at this time.
scientia non olet · About LEMON Manuals