LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2014 >> Accent GLS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Interior Trim) >> Front Pillar Trim >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2014 Hyundai Santa Fe Sport and 2013 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Put on gloves to protect your hands.
NOTE:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
  • Take care not to bend or scratch the trim and panels.
  1. Using a screwdriver or remover, remove the front pillar trim (A).
    Fig 1: Identifying Front Pillar Trim
    G09365738Courtesy of HYUNDAI MOTOR AMERICA
  2. Install in the reverse order of removal.

    Information 

    • Replace any damaged clips.