Repair procedures: Inspection

WARNING: This page is about a different car, the 2012 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ignition Switch Connector

Courtesy of HYUNDAI MOTOR CO.

Fig 2: Identifying Key Warning Switch Connector

Courtesy of HYUNDAI MOTOR CO.

Disconnect the ignition switch connector (A) and key warning switch connector (B) from under the steering column.
Check for continuity between the terminals.
If continuity is not specified, replace the switch.

Fig 3: Identifying Ignition And Key Warning Switch Connectors Terminal Continuity Chart
Courtesy of HYUNDAI MOTOR CO.