LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Veloster Turbo, Automatic Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Blower System >> Intake Actuator >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the heater & blower unit.

    (Refer to "HEATER UNIT ")

  3. Loosen the mounting screws and then remove the intake actuator (A).
    Fig 1: Intake Actuator
    G09135488Courtesy of HYUNDAI MOTOR AMERICA
  4. Installation is the reverse order of removal.
scientia non olet · About LEMON Manuals