LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Veloster Turbo, Automatic Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Blower System >> Blower Unit >> Repair Procedures >> Replacement

Repair Procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the heater & blower unit.

    (Refer to "HEATER UNIT ")

  3. Remove the blower unit (A) from the heater unit after loosening a mounting screws.
    Fig 1: Blower Unit & Mounting Screw
    G09135478Courtesy of HYUNDAI MOTOR AMERICA
    NOTE: Make sure that there is no air leaking out of the blower and duct joints
  4. Installation is the reverse order of removal.
scientia non olet · About LEMON Manuals