LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Veloster Turbo, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System - Non-Turbo) >> Engine Coolant Temperature Sensor (ECTS) >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the engine coolant temperature sensor connector (A).
    Fig 1: Identifying Engine Coolant Temperature Sensor Connector
    G08807023Courtesy of HYUNDAI MOTOR AMERICA
  3. Supplement the engine coolant (Refer to "Cooling System ").
scientia non olet · About LEMON Manuals