LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Veloster Turbo, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Fuel Delivery System - Non-Turbo) >> Filler-Neck Assembly >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Open the fuel filler door, and then remove the filler-neck assembly mounting screws (A).
    Fig 1: Filler-Neck Assembly Mounting Screws
    G08807119Courtesy of HYUNDAI MOTOR AMERICA
  2. Disconnect the fuel filler hose (A) and the ventilation hose (B).
  3. Remove the filler-neck assembly from the vehicle after removing the bracket mounting bolt (C).
    Fig 2: Fuel Filler, Ventilation Hose & Bracket Mounting Bolts
    G08807120Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals