LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Veloster Turbo, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Lighting System) >> Hazard Lamp Switch >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different car, the 2012 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the heater control module.

    (Refer to the HEATER & A/C CONTROLLER )

    Fig 1: Identifying Heater Control Module
    G08811827Courtesy of HYUNDAI MOTOR AMERICA