LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Dual Clutch Transmission Control System) >> Inhibitor Switch >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Installation is the reverse of removal.
    NOTE:
    • Fix the inhibitor manual control lever in the N jig hole when you assemble the shift cable.
    • Adjust the shift cable after you install the inhibitor switch.

      (Refer to the SHIFT LEVER  .

scientia non olet · About LEMON Manuals