LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Dual Clutch Transmission Control System >> Gear Actuator >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Installation is the reverse of removal.
    CAUTION:
    • Make sure that no debris falls into the hole (A).
      Fig 1: Identifying Gear Actuator Hole
      G09135562Courtesy of HYUNDAI MOTOR AMERICA
    • Check the angle of the gear actuator finger (A), and also check whether the transmission lever is in the N position.
      Fig 2: Identifying Gear Actuator Finger Angle
      G09135563Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals