LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2013 >> Tucson GLS, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Auto Lighting Control System >> Auto Light Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the photo & auto light sensor (A) from crash pad upper side by using a flat-up screwdriver.
    Fig 1: Identifying Auto Light Sensor
    G06874889Courtesy of HYUNDAI MOTOR CO.
  3. Remove the auto light connector.
scientia non olet · About LEMON Manuals